Martin RUSH MH 6 Wash

$0.00

The RUSH MH 6 Wash is an exciting adaption of the hugely popular RUSH PAR 2 RGBW Zoom, using the same LED engine and zoom system, but additionally featuring moving head capability. The RUSH MH 6 Wash offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 10°–60° zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.

  • Bright LED moving head wash light

  • 12 x 10 W RGBW LEDs

  • Single-lens wash with fully premixed color

The RUSH MH 6 Wash is an exciting adaption of the hugely popular RUSH PAR 2 RGBW Zoom, using the same LED engine and zoom system, but additionally featuring moving head capability. The RUSH MH 6 Wash offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 10°–60° zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.

  • Bright LED moving head wash light

  • 12 x 10 W RGBW LEDs

  • Single-lens wash with fully premixed color

Features

  • 12 x 10 W Osram Ostar RGBW LED’s

  • Single-lens wash with fully premixed color

  • 2,000 lumen output

  • 10°–60° zoom

  • 32 pre-built color macros

  • Temperature-controlled cooling system

  • Digital display menu

  • PowerCON in and through

  • 3 and 5-pin DMX options

Specifications

  • PhysicalLength: 290 mm (11.4 in.)Width: 189 mm (7.4 in.)Height: 360 mm (14.2 in.)Weight: 7.1 kg (15.7 lbs.)

    Dynamic EffectsColor mixing: RGBWColor presets: 36 color presets plus full white, ‘color wheel’ effectsZoom: MotorizedElectronic dimming: 0 - 100%, four dimming curve optionsStrobe and pulse effects: Variable speed and action, random strobeElectronic shutter effect: Instant open and blackoutPan: 540°Tilt: 200°

    Control and ProgrammingControl options: DMX16-bit fine control: Dimming, pan and tiltDMX address setting: Control panel with LCD displayWhite balance control: RGB adjustmentDMX channels: 14DMX compliance: USITT DMX512/1990

    OpticsZoom range: 10° - 60°Light source: 12 x 10 W RGBW Osram Ostar LEDsMinimum LED lifetime: 50,000 hours (to >70% luminous output)*Binning: Tight color and flux binning*Figure obtained under manufacturer's test conditions.

    ConstructionHousing: High-impact flame-retardant thermoplasticColor: BlackIngress protection rating: IP20

    InstallationMounting points: One quarter‐turn bracket for rigging clampLocation: Indoor use only, must be fastened to surface or structureOrientation: AnyMinimum distance to combustible materials: 100 mm (4 in.)Minimum distance to illuminated surfaces: 200 mm (8 in.)Minimum clearance around fan and air vents: 100 mm (4 in.)

    ConnectionsAC power in, thru: Neutrik PowerConDMX data in, thru: 3-pin and 5-pin locking XLR

  • ElectricalAC power: 100-240 V nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch modeFuse: T 3.15 ATypical half-cycle RMS inrush current: 11.3 A (at 240 VAC)Recommended Miniature Circuit Breaker: Type D*

    *Per IEC 60898/UL489/CSA C22.2 No. 5
    Power consumption figures are typical, not maximum. Allow for +/-10% variation.

    Typical Power and Current120 V, 60 Hz: 1.3 A, 150 W, PF 0.99230 V, 50 Hz: 0.7 A, 150 W, PF 0.94Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

    ThermalCooling: Forced air (temperature-regulated, low noise)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 0° C (32° F)

    ApprovalsEU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547US safety: UL 1573, UL 8750US EMC: CFR Title 47 Part 15Canadian safety: CSA C22.2 No. 166Australia/NZ: C-TICK N4241 / RCM