Martin P3 PowerPort 1500

$0.00

Indoor power & data unit for Martin Creative LED

The P3 PowerPort 1500 is an integrated power supply and data processor for the Martin™ range of creative LED video products, including the VDO Sceptron™, Exterior PixLines™, VC-Grids™, VC-Strips™ and VC-Dots™. When driven by one of Martin’s award-winning P3™ System Controllers, it combines stable power delivery with high-speed, high-capacity video processing. Setup and configuration are easy and intuitive.

  • Indoor power and data processor for all Martin™ creative LED video products

  • Flexible integration: can be located remotely from video display products

  • Easy cabling and configuration

Indoor power & data unit for Martin Creative LED

The P3 PowerPort 1500 is an integrated power supply and data processor for the Martin™ range of creative LED video products, including the VDO Sceptron™, Exterior PixLines™, VC-Grids™, VC-Strips™ and VC-Dots™. When driven by one of Martin’s award-winning P3™ System Controllers, it combines stable power delivery with high-speed, high-capacity video processing. Setup and configuration are easy and intuitive.

  • Indoor power and data processor for all Martin™ creative LED video products

  • Flexible integration: can be located remotely from video display products

  • Easy cabling and configuration

Features

  • P3 image processing technology

  • Set-up and addressing via P3 System Controller family

  • P3 input and thru to allow daisy-chaining

  • 4 hybrid power/data output ports

  • Wall-, truss- and rack-mountable

  • Can be located up to 50 m away from the creative LED video products

Specifications

  • PhysicalWidth: 482 mm (19.0 in.)Height: 88 mm (3.5 in.) rackmount 2UDepth: 335 mm (13.2 in.)Weight: 10 kg (22.1 lbs.)

    Control and ProgrammingAddressing and status: Via P3 System ControllerMapping: Via P3 System ControllerFirmware update: Via P3 System Controller

    Control/User InterfaceDevice status: Multicolor status LEDPower output status: Four LEDsData output status: Four LEDsDevice test and reset: Pushbutton to call up local test patterns and reset device

    P3 Signal ProtocolSignal type: Gigabit EthernetProtocol : Proprietary Martin P3Hot pluggable: Yes, electrically isolated at all connectionsCable type: Ethernet, CAT 5e or betterCable length: Up to 100 m between any 2 devices, extendable with Ethernet switch

    ConstructionHousing: Steel and aluminumColor: Matte blackProtection rating: IP20

    InstallationMounting: 19-inch rackmount, wall mount, flown from rigging clamps

    ConnectionsPower input: Neutrik PowerConP3 data in/out: Two Neutrik Ethercon RJ-45 socketsCombined power & data out: Four 4-pin female XLR sockets (hybrid power & data cable)

  • ElectricalAC power: 100-240 V nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch-modeTypical total power consumption: 1540 W (including full load of connected display devices, all at full intensity)Main fuse: 10 AT (slow blow) x 4

    ThermalCooling: Filtered forced air (temperature-regulated, low noise)Maximum ambient temperature (Ta max.): 45° CMinimum ambient temperature (Ta min.): -20° CTotal heat dissipation (calculated, +/- 10%):

    530 BTU/hr. (not including display devices but with system at full load)

    ApprovalsEU safety: EN 60950EU EMC: EN 55103-1, EN 55103-2, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3US safety: ANSI/UL 60950-1Canadian safety: CSA C22.2 No. 60950-1

    Compatible Fixtures

    VDO Sceptron 10
    VDO Sceptron 20
    VDO Sceptron 40
    VDO Fatron 20
    VDO Dotron
    Exterior PixLine 10
    Exterior PixLine 20
    Exterior PixLine 40
    Exterior Dot-HP RGB
    Exterior Dot-HP CW
    VC-Grid 15
    VC-Grid 25
    VC-Grid 30
    VC-Grid 60
    VC-Strip 15
    VC-Strip 25
    VC-Strip 30
    VC-Strip 60
    VC-Dot 1 (via VC-Feeder)
    VC-Dot 4 (via VC-Feeder)
    VC-Dot 9 (via VC-Feeder)