DPA 4099 Instrument Microphone

$0.00

The 4099 is already the recognized standard for this type of microphone and the CORE version adds just another layer of sound quality that further distances this mic from its competitors. 4099 CORE brings more clarity and details to your music, across the entire dynamic range. Anyone looking for the very highest sound quality should choose CORE – every musician, live sound engineer and anyone else who takes pride in quality audio.

CORE by DPA is a powerful new technology at the heart of DPA miniature microphones. We’ve minimized distortion. From pianissimo to forte, you will experience increased clarity and openness. Learn more about CORE by DPA.

From the piano to guitar; strings to woodwinds; brass to percussion, the 4099 Series sounds equally impressive on them all. This one microphone model can beautifully reinforce an entire orchestra. You can move the mic to another instrument; just make sure you have the right type of clip to mount it correctly.The award-winning 4099 Series gives you a much more natural sound than any clip-on microphone or pickup. This instrument condenser microphone rejects unwanted noise and accurately captures the true voice of your acoustic instrument.

Specifications

4099 Instrument Microphone

4099 Instrument Microphone for Loud SPL

4099 Instrument Microphone for Extreme SPL

Directional pattern Supercardioid

Principle of operation Pressure gradient

Cartridge type Pre-polarized condenser

Frequency response 20 Hz - 20 kHz

Effective frequency range ±2 dB, at 20 cm (7.9 in) 80 Hz - 15 kHz with 2 dB soft boost at 10-12 kHz

Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa

Equivalent noise level, A-weightedTyp. 23 dB(A) re. 20 μPa (max. 26 dB(A))

Distortion, THD < 1%128 dB SPL RMS, 131 dB SPL peak

Dynamic rangeTyp. 108 dB

Max. SPL, THD 10%142 dB SPL peak

Rated output impedanceFrom MicroDot: 30 - 40 Ω. From DAD4099-BC or DAD6001-BC: 100 Ω

Cable drive capabilityUp to 300 m (984 ft) with DAD6001-BC/DAD4099-BC XLR Adapter

Output balance principleSignal balanced with DAD4099-BC or DAD6001-BC XLR Adapter

Common mode rejection ratio (CMRR)> 60 dB from 50 Hz to 15 kHz with DAD4099-BC or DAD6001-BC XLR Adapter

Power supply (for full performance)For wireless systems Min. 5 V - max. 10 V through DPA adapter
With DAD6001-BC or DAD4099-BC: P48 (Phantom Power). Will work from 12 V

Current consumptionTyp. 1.5 mA (microphone). 3.5 mA with DAD4099-BC or DAD6001-BC XLR Adapter

ConnectorMicroDot

Weight Microphone: 17 g (0.60 oz)
Instrument Microphone Clamp Mount (CM4099): 16 g (0.56 oz)
Instrument Microphone Clip for Accordion (AC4099): 5 g (0.18 oz)
Instrument Microphone Clip for Bass (BC4099): 20 g (0.71 oz)
Instrument Microphone Clip for Cello (CC4099): 13 g (0.46 oz)
Instrument Microphone Clip for Drum (DC4099): 13 g (0.46 oz)
Instrument Microphone Clip for Guitar (GC4099): 12 g (0.42 oz)
Instrument Microphone Clip for Piano (PC4099): 19 g (0.67 oz)
Instrument Microphone Clip for Sax and Trumpet (STC4099): 7 g (0.25 oz)
Instrument Microphone Clip for Violin and Mandolin (VC4099): 10 g (0.35 oz)
Universal Instrument Microphone Clip (UC4099): 15 g (0.53 oz)
Mic Stand Mount for Instrument Microphone (MS4099): 28 g (0.99 oz): 24 g (0.85 oz)
Cold Shoe Mount with standard 1/4" in thread (CS4099): 5 g (0.18 oz)

Microphone diameter 5.7 mm (0.22 in)

Microphone length 45 mm (1.8 in)

Cable length 1.8 m (5.9 ft)

Cable diameter 1.6 mm (0.06 in) / 2.2 mm (0.09 in)

Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099-BC or DAD6001-BC XLR adapter)

Temperature range -40°C to 45°C (-40°F to 113°F)

Relative humidity (RH) Up to 90%

Gooseneck length 140 mm (5.5 in)

Sensitivity selection tolerance (at 1 kHz) ±1 dB

Colors Black

Polar pattern